Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in North Hollywood?
For most homeowners in North Hollywood, individual garage door panel replacement typically costs between $250 and $500 per panel, depending on the age, material, and brand of your existing door. When only one or two sections are damaged, replacing the specific panels is a cost-effective alternative to replacing the entire door system, provided that the matching parts are still in production.
Because garage doors in neighborhoods like Valley Village and the Arts District deal with significant thermal expansion from our intense summer heat, finding exact color and texture matches can be a challenge. At Mainspring Garage Door Co., we specialize in sourcing these specific components to ensure your door maintains its structural integrity and curb appeal without the expense of a full installation. If you are dealing with a damaged section, call us at (747) 239-5578 for an accurate quote based on your specific door model.
Panel Replacement Cost Breakdown (2026)
Pricing for panel work is rarely one-size-fits-all, as it depends heavily on whether the door is a standard residential model or a custom architectural piece. The following table outlines the general market rates we see across the North Hollywood area for 2026. Keep in mind that these figures represent the cost for replacing a single, damaged panel.
| Service Type | Estimated Cost Range |
|---|---|
| Single Panel Replacement (Standard) | $250 - $500 |
| Hardware/Hinge Transfer (Per Panel) | $50 - $100 |
| Color Matching/Touch-up Labor | $75 - $150 |
| Full Section Reinforcement (Internal) | $100 - $200 |
The total cost on your invoice usually includes the sourcing fee, the labor to disassemble the adjacent sections, the installation of the new panel, and the recalibration of the door balance. Because we have been serving the North Hollywood community since 1984, we have established relationships with major manufacturers like Clopay, Amarr, and Raynor, which often helps us track down discontinued panel styles that other companies might claim are impossible to find.
What Affects Panel Replacement Pricing in North Hollywood
When our technicians, led by Carl Dutton, assess a damaged door, we look at several variables that influence the final price. Understanding these factors helps you decide whether a repair makes financial sense for your specific situation.
- Door Age and Availability: If your door is older than 15 years, the manufacturer may have discontinued the specific embossment pattern or color finish, which can increase the time required to source a compatible replacement.
- Material Composition: Aluminum and steel panels are generally more straightforward to replace than heavy, custom wood carriage-style doors, which may require specialized carpentry and finishing work.
- Structural Damage vs. Cosmetic Dents: If the impact also bent the tracks or damaged the hinges, the scope of work expands beyond the panel itself, as we must ensure the entire assembly operates safely.
- Local Code Requirements: In certain North Hollywood residential zones, specific wind-load or fire-rating requirements may dictate the type of panel material we can legally install on your garage structure.
- Extent of the Impact: A single panel dented by a vehicle often requires less labor than a door that has buckled across multiple sections, which can sometimes compromise the integrity of the vertical stiles.
We believe in upfront pricing. Before we pick up a tool, we will explain exactly what the job entails, what parts are required, and what the final bill will be. There are no hidden fees, and we stand behind every completed job with our 90-Day Done Right Promise.
How to Save on Panel Replacement
You do not always need to replace an entire door just because of a dent or a crack. We often find that homeowners assume they need a full replacement when a targeted repair is the smarter path. To keep costs manageable, we recommend the following steps:
- Take Detailed Photos: Before you call us, take clear photos of the damaged panel from both the inside and outside, and try to locate the manufacturer’s sticker, usually found on the inside of the door or near the track.
- Check Your Warranty: If your door was installed within the last few years, the manufacturer might still cover certain structural defects, even if the damage was caused by a minor accident.
- Combine Maintenance: If we are already on-site to replace a panel, consider bundling it with a seasonal tune-up for $89, which ensures the rest of your system is balanced and operating quietly.
- Use Our Standing Offers: We honor a permanent 5% discount for seniors and veterans, and we offer $50 off any repair over $250.
- Get a Second Opinion: If another company quoted you for a full door replacement, ask us for a free second opinion. We are happy to review their estimate and let you know if a panel repair is a viable, lower-cost alternative.
If you are ready to get your garage door back in shape, call us at (747) 239-5578. We provide free estimates and are always happy to discuss whether a repair is the right move for your home.
Safety Considerations for Damaged Panels
A damaged garage door panel is more than a cosmetic issue. If a panel is cracked or buckled, it can cause the door to bind in the tracks, putting excessive strain on your opener and your garage door springs. High-tension cables and springs are dangerous components that carry the entire weight of the door. Please do not attempt to pry a bent panel back into shape yourself, as the tension in the system can cause the door to drop or the cables to snap unexpectedly. If your door is stuck or visibly crooked, leave it alone and call a professional. We are equipped to handle these repairs safely and efficiently.
FAQs - Panel Replacement Cost
Is it cheaper to repair a panel or replace the whole door?
In most cases, replacing a single panel is significantly cheaper than a full door replacement, typically costing between $250 and $500 compared to the $700 to $2,200 range for a new installation. If the structural damage is limited to one or two sections and the rest of the door is in good condition, we almost always recommend a targeted repair to provide you with a square deal.
Can you match the color of my existing door?
Yes, we work with major brands like LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and we prioritize finding an exact color and texture match for your home. If a perfect factory match is unavailable due to the age of the door, we will discuss the options for blending the new panel with the existing ones before any work begins.
How long does a panel replacement take?
Because our trucks are stocked with a wide range of parts and hardware, we complete most panel repairs in a single visit. We aim to have your garage door fully operational and looking right again within a few hours of our arrival.
Do you offer a warranty on the repair work?
Every job we complete is backed by our 90-Day Done Right Promise. If the new panel or the associated hardware installation is not right, we will return to your home to fix it at no charge, in writing, with no questions asked.
What if my panel style is discontinued?
If your door is older, finding an exact match can be difficult, but we have 42 years of experience in the trade and extensive industry contacts to help source legacy parts. If a perfect match is truly impossible, we will provide you with the honest options for the next best solution, such as using a panel that matches the structural profile even if the finish requires a slight touch-up.
Pricing reflects the North Hollywood market as of 2026. Mainspring Garage Door Co. offers free estimates - call (747) 239-5578.
Written by Carl Dutton, Owner at Mainspring Garage Door Co., serving North Hollywood since 1984.
What Our Customers Say
"New door in about four hours, hauled the old one away, and he stayed to program both cars and the wall panel before he left."
- Tracy Lawson"The opener kept reversing about a foot from the floor. Turned out the safety sensors had been knocked crooked by a bike. He straightened them, would not take money for it, and told me to call when something real goes wrong."
- Colleen Barrett"Second house I have used them at. Different crew, different state, same standard. That is the whole reason I called them again instead of shopping around."
- Craig Sullivan